CleanMax Pro-Series Upright, 10 Amps, W/ Tools Onboard

The CMP-3T commercial vacuum is part of the CleanMax Vacuum Pro Series, meaning it features a tool-less belt change and comes with two 30-foot commercial grade cords to minimize downtime. Should one of the commercial grade cords become damaged, you can easily swap it out by connecting a new one to the 6.5 inch pigtail cord and keep going.

This professional vacuum comes with a one year warranty on the body and a two year warranty on the motor.

The CMP-3T upright vacuum comes with a metal telescopic wand and ten-foot cleaning reach, and uses HEPA media bags and filters. The motor is thermal and pressure activated to protect it from overheating. In the event that the motor overheats, the thermal fuse protector will safely shut off the vacuum cleaner to avoid potential damage.

To reset the thermal fuse, unplug the vacuum cleaner and check for the problem (it could be a full bag, a clog in the hose or filters, etc). Correct the problem and then locate the tripped fuse (this will be a small red or white button on the lower left side of the main body - about one inch to the right of the left wheel). Use a pointy object (such as a paper clip or pencil) to push the reset button, and then plug the vacuum cleaner in and begin using it again.

To clean the nozzle hose, pull out and turn the lid of the accessory attachment opening and remove the clog or blockage. If that doesn’t work, remove the hose cuff from the attachment port inlet and check for the clog. If you still can’t locate the clog, turn the vacuum over and remove the bottom plate. Check the nozzle inlet tube for obstructions, clear the tube and then reinstall the bottom plate.