The NSS eForce 6402779 is a 27-inch battery-powered rider burnisher with patented joystick control, adjustable pad pressure, high-speed 1700 RPM polishing, and integrated Vac-Trac dust control for productive commercial floor finishing.

Features:

• Ride-On Burnishing Platform – Designed to increase productivity across large commercial floor areas while reducing operator walking and fatigue.

• 390AH AGM Battery Configuration – Provides a sealed, low-maintenance battery setup for dependable electric operation.

• 27-Inch Burnishing Width – Covers a wide path with each pass for efficient large-area floor maintenance.

• 1700 RPM Pad Speed – Delivers high-speed burnishing performance to restore gloss and appearance to finished floors.

• Adjustable 60, 75 or 90 lb. Pad Pressure – Lets the operator match pad pressure to the floor condition and desired finish.

• Patented Joystick Control – Replaces a conventional steering wheel and foot pedal with intuitive hand control.

• Natural Operator Position – Joystick operation allows the operator to sit comfortably without constantly working steering and pedal controls.

• Flip-Up Pad Driver – Allows pad changes from a standing position for easier daily maintenance.

• Vac-Trac Dust Control System – Captures 99.5% of floor-finish powder and dust generated during burnishing.

• Integrated Dust Collection – Dust control is built directly into the pad-motor shroud for cleaner operation.

• 68 dB(A) Sound Level – Supports quieter operation than many fuel-powered burnishing systems.

• Electric Operation – Eliminates propane fuel handling, oil changes, and engine-related maintenance.

• Lower Routine Maintenance Requirements – Battery-electric construction reduces many of the service tasks associated with propane burnishers.

• Consistent High-Speed Performance – Combines pad speed and controlled pressure to efficiently restore floor-finish luster.

• Designed for Large Facilities – Well suited for schools, healthcare facilities, retail spaces, warehouses, and other expansive finished-floor environments.

The NSS eForce Rider Burnisher 390AH AGM 6402779 is designed for facilities that need the productivity of a ride-on burnisher without the fuel, emissions, and engine maintenance associated with propane equipment.

Its combination of a 27-inch pad, 1700 RPM speed, three selectable pad-pressure settings, joystick steering, and integrated dust control makes it a strong fit for regular high-speed maintenance of finished hard floors.

Patented Joystick Control

One of the eForce’s defining features is NSS’ patented joystick steering system.

Instead of using a traditional steering wheel and foot pedal, the operator controls the machine from the joystick while remaining in a more natural seated position.

This design can help reduce repetitive steering movements during long burnishing shifts.

1700 RPM Burnishing Speed

The eForce operates at approximately 1700 RPM.

This high-speed pad rotation is designed to restore the shine and appearance of compatible floor finishes during routine maintenance.

Adjustable Pad Pressure

The operator can select from three pad-pressure settings:

• 60 lbs.

• 75 lbs.

• 90 lbs.

Adjustable pressure provides more flexibility for different floor conditions, pads, finishes, and maintenance requirements.

27-Inch Burnishing Path

The 27-inch pad size provides broad floor coverage with each pass.

The combination of a wide cleaning path and ride-on design makes the eForce particularly useful for large facilities where walk-behind burnishing would require more labor.

Vac-Trac Dust Control System

Burnishing can produce fine powder and finish dust as the pad works across the floor.

The eForce incorporates NSS’ Vac-Trac Dust Control System directly into the pad-motor shroud.

NSS states that the system captures approximately 99.5% of the floor-finish powder and dust generated during burnishing.

This helps keep the surrounding environment cleaner and reduces the amount of loose dust left behind after floor maintenance.

Flip-Up Pad Driver

The pad driver flips upward to simplify pad replacement.

Instead of requiring the operator to crouch beneath the machine, pads can be accessed and changed from a more comfortable standing position.

390AH AGM Battery System

This configuration uses a 390AH AGM battery system.

AGM batteries are sealed and require less routine maintenance than traditional flooded lead-acid batteries, eliminating regular watering requirements.

Electric Burnishing

The eForce uses battery-electric power instead of propane.

This eliminates the need for:

• Propane fuel purchases

• Engine oil changes

• Combustion-engine maintenance

• Fuel-cylinder handling

• Indoor engine exhaust during operation

For facilities with regular burnishing schedules, the simpler electric drivetrain can also reduce routine maintenance requirements.

68 dB(A) Sound Level

The eForce operates at approximately 68 dB(A).

The quieter electric platform can be useful in environments where floor maintenance may take place around occupants or during extended operating hours.

Professional Applications

The NSS eForce is well suited for:

• Schools and universities

• Hospitals and healthcare facilities

• Retail stores

• Grocery stores

• Airports

• Convention facilities

• Office buildings

• Warehouses

• Government buildings

• Large commercial facilities

Specifications

Specification	Details
Model	NSS eForce
Catalog Number	6402779
Product Type	Battery-Powered Rider Burnisher
Burnishing Width	27 in.
Pad Speed	1700 RPM
Pad Pressure	60 / 75 / 90 lbs.
Battery Configuration	390AH AGM
Steering	Patented Joystick Control
Dust Control	Vac-Trac
Dust Capture	99.5% of Generated Floor-Finish Powder & Dust
Sound Level	68 dB(A)
Pad Driver	Flip-Up
Power Source	Battery Electric

Product Resources

Download eForce Product Specification Sheet

Download eForce Operation Manual

Download eForce Parts List