The TASKI AERO 3500 D1230553 is a compact ride-on vacuum sweeper configured with lithium-ion battery technology and IntelliTrail connectivity, combining a 65 cm cleaning width, dual cylindrical brush deck, three-stage filtration, and multi-surface performance for hard floors and commercial carpet.

Features:

• Lithium-Ion Battery Configuration – Uses TASKI IntelliPower lithium-ion technology for a low-maintenance rechargeable power system.

• IntelliTrail Connectivity – Adds TASKI telemetry capability for supported fleet-management and machine-use monitoring.

• 25.6-Inch / 65 cm Working Width – Provides productive coverage while maintaining a compact ride-on footprint.

• Ride-On Operation – Helps increase productivity and reduce operator effort over large cleaning routes.

• Dual Cylindrical Brush Deck – Two cylindrical brushes sweep debris into the integrated hopper.

• Hard Floor and Carpet Capability – Designed as a multi-surface vacuum sweeper for compatible hard floors and commercial carpet.

• Up to Approximately 38,500 Sq. Ft./Hr. Productivity – Published productivity of 3,575 m²/hr. supports efficient large-area cleaning.

• Up to 3.4 MPH Working Speed – Provides efficient cleaning speed for corridors and larger open areas.

• Three-Stage Filtration System – Helps capture dust as debris is collected.

• Digital Brushless Motor – Designed for efficient energy use and reduced motor maintenance.

• Whisper Technology – Helps reduce operating noise for cleaning in occupied environments.

• Compact Rider Design – Provides access to narrower areas that can be difficult for larger ride-on sweepers.

• Integrated Debris Hopper – Collects swept material directly from the cylindrical cleaning deck.

• TASKI Intelligent Technology Platform – Designed to work with TASKI digital and fleet-management technologies.

• HEPA Filtration Capability – Compatible TASKI HEPA filtration solutions may be available depending on machine configuration.

The TASKI AERO 3500 Lithium IntelliTrail combines the productivity of a ride-on sweeper with TASKI’s lithium-ion battery and connected fleet-management technologies.

Its compact design makes it particularly useful for facilities that need to clean a combination of commercial carpet and hard flooring without moving to a much larger industrial sweeper.

Lithium-Ion IntelliPower Configuration

This D1230553 configuration is identified as a Lithium AERO 3500, utilizing TASKI’s IntelliPower lithium-ion battery technology.

Lithium-ion technology is designed to provide a low-maintenance alternative to traditional flooded or gel lead-acid battery systems.

The exact battery capacity and runtime are not specified in the supplied product information and may depend on the specific battery package installed.

IntelliTrail Connectivity

This configuration includes IntelliTrail capability.

TASKI IntelliTrail is designed to support connected fleet management by providing machine-use and telemetry information when used with the appropriate TASKI services.

Depending on the installed system and service level, IntelliTrail can support information such as:

• Machine utilization

• Location information

• Fleet visibility

• Operating data

• Performance analytics

Available functions may depend on the selected TASKI telemetry package and service subscription.

65 cm / 25.6-Inch Cleaning Width

The AERO 3500 provides a 65 cm working width, equivalent to approximately 25.6 inches.

This balances cleaning productivity with the maneuverability needed for corridors, doorways, and more confined indoor areas.

Dual Cylindrical Brush Deck

The cleaning system uses a double cylindrical brush deck with an integrated hopper.

The cylindrical brushes agitate and collect loose material while the vacuum and filtration system helps manage dust during operation.

Multi-Surface Cleaning

The AERO 3500 is designed for cleaning both:

• Compatible hard floors

• Commercial carpet

This makes it useful in facilities with mixed flooring where separate sweeping and wide-area vacuum equipment would otherwise be required.

Up to Approximately 38,500 Sq. Ft. Per Hour

TASKI publishes maximum productivity at approximately 3,575 m²/hr., equivalent to roughly 38,500 square feet per hour.

TASKI positions the AERO 3500 as capable of providing significantly higher productivity than traditional manual cleaning methods.

Actual productivity will vary based on:

• Facility layout

• Floor type

• Debris level

• Travel speed

• Obstacles

• Hopper-emptying frequency

• Operator technique

Up to 5.5 km/h Working Speed

The AERO 3500 has a published working speed of approximately 5.5 km/h, or roughly 3.4 MPH.

This helps increase coverage across long corridors and large open areas.

Three-Stage Filtration System

The AERO 3500 incorporates a three-stage filtration system to help control dust during sweeping.

This makes it particularly useful for indoor commercial environments where dust management is important.

Digital Brushless Motor

TASKI’s digital brushless motor technology is designed to provide efficient operation while reducing traditional motor-brush wear.

This contributes to the AERO 3500’s focus on energy efficiency and reduced routine maintenance.

Whisper Technology

TASKI Whisper technology is designed to reduce vacuum-system noise while maintaining cleaning performance.

Lower operating noise makes the machine more practical for daytime cleaning in occupied environments.

Compact Ride-On Design

The AERO 3500 combines seated operation with a relatively compact machine footprint.

This helps operators move between larger open spaces and narrower indoor areas without switching machines as frequently.

HEPA Filtration Capability

TASKI lists HEPA filtration among the intelligent cleaning solutions available for the AERO 3500 platform.

HEPA filtration should be considered an available or configuration-dependent feature unless specifically listed as included with the selected machine package.

Professional Applications

The TASKI AERO 3500 Lithium IntelliTrail is well suited for:

• Schools and universities

• Hospitals and healthcare facilities

• Office buildings

• Hotels

• Retail stores

• Shopping centers

• Airports

• Transportation facilities

• Convention centers

• Public buildings

• Commercial cleaning contractors

• Carpeted corridors

• Large hard-floor areas

• Mixed-surface facilities

• Multi-machine fleets requiring telemetry and utilization tracking

Specifications

Specification	Details
Model	TASKI AERO 3500
Product Number	D1230553
Configuration	Lithium with IntelliTrail
Product Type	Ride-On Vacuum Sweeper
Battery Technology	TASKI IntelliPower Lithium-Ion
IntelliTrail	Included / Configuration-Specific
Working Width	65 cm / Approx. 25.6 in.
Cleaning Deck	Dual Cylindrical Brush
Debris Collection	Integrated Hopper
Maximum Productivity	Approx. 3,575 m²/hr. / 38,500 sq. ft./hr.
Working Speed	Up to 5.5 km/h / Approx. 3.4 MPH
Filtration	Three-Stage
Motor Type	Digital Brushless
Noise Technology	TASKI Whisper
Hard-Floor Cleaning	Yes
Commercial Carpet Cleaning	Yes
HEPA Filtration	Available / Configuration Dependent

Included

• TASKI AERO 3500 Ride-On Vacuum Sweeper

• Lithium-Ion Battery Configuration

• TASKI IntelliTrail Connectivity

• Dual Cylindrical Cleaning Deck

• Integrated Debris Hopper

• Three-Stage Filtration System

Optional / Available Technologies

• TASKI IntelliTrail Analytics

• TASKI HEPA Filtration Options

• Compatible TASKI AERO 3500 Cleaning Accessories

• Other TASKI Fleet-Management and Intelligent Cleaning Solutions